Steel

Highlights The slowdown in global industrial activity appears to have bottomed. This, along with an apparent shared desire for a ceasefire in the Sino-US trade war, points toward a measured recovery in manufacturing and global trade, which will contribute to higher iron-ore and steel demand beginning in 1H20. A trade-war ceasefire, should it endure, will reduce global economic uncertainty. Along with continued monetary accommodation from systematically important central banks, reduced economic uncertainty will boost global growth and industrial-commodity demand generally by allowing the USD to weaken. We expect Beijing policymakers to remain focused on keeping GDP growth above 6.0% p.a. To that end, we believe a boost in infrastructure spending next year is likely, which also will be bullish for steel demand. Given China’s growing share of global steel production, we expect price differentials for high-grade iron ore – most of which comes from Brazil – to widen as steel demand increases next year. Given this view, we are initiating a strategic iron-ore spread trade at tonight’s close: Getting long December 2020 high-grade (65% Fe) futures traded on the Singapore Exchange vs. short the benchmark-grade (62% Fe) December 2020 futures traded on the CME. We recommend a 20% stop-loss on this recommendation. Feature Iron ore and steel demand will get a lift from the rebound our proprietary Global Industrial Activity (GIA) index has been forecasting for the past few months (Chart of the Week). The GIA index is designed to pick up changes in Chinese industrial activity, given its outsized influence on world industrial output, and also makes use of trade data, FX rates, and global manufacturing data. The rebound we are expecting will get a fillip from an apparent shared desire for a ceasefire in the Sino-US trade war, which, based on media reports, is close to being agreed. Should this ceasefire prove to be durable, it would contribute to a lowering of global economic policy uncertainty (GEPU), which, as we have shown recently, has kept the USD well bid to the detriment of industrial-commodity demand.1 Chart of the WeekBCA GIA Index Pick-Up Points To Higher Global Steel Demand BCA GIA Index Pick-Up Points To Higher Global Steel Demand BCA GIA Index Pick-Up Points To Higher Global Steel Demand While we do expect economic uncertainty to decline next year, it will remain elevated due to continued Sino-US trade tensions – even if a “phase-one” deal is agreed – ongoing hostilities in the Persian Gulf, and popular discontent with the political status quo globally. As global economic uncertainty fades, the USD broad trade-weighted index for goods (TWIBG) will fall, which will bolster EM GDP growth, and a recovery in global trade next year (Chart 2). If, as media reports suggest, this so-called “phase-one” agreement includes a relaxation – or complete removal – of tariffs by the US on Chinese imports, we would expect manufacturing activity to pick up as Chinese manufacturers spin-up capacity to meet demand. A reduction in tariffs also will lessen the deadweight loss they imposed on US households, which will support higher consumption.2 Chart 2Reduced Global Economic Uncertainty Bolsters Global Trade Volumes, EM GDP Iron Ore, Steel Prices Set To Lift Iron Ore, Steel Prices Set To Lift That said, economic uncertainty still remains high. This uncertainty is destructive of demand and will remain a key risk factor in 2020. While we do expect economic uncertainty to decline next year, it will remain elevated due to continued Sino-US trade tensions – even if a “phase-one” deal is agreed – ongoing hostilities in the Persian Gulf, and popular discontent with the political status quo globally. China’s Steel Demand Holds Up In Trade War China accounts for more than half of global steel production and consumption, and the lion’s share of seaborne iron-ore consumption (Chart 3). This makes its steel industry critically important to the global economy, and a key barometer of industrial activity worldwide. With global industrial activity bottoming and moving higher, and the USD expected to weaken, we expect iron ore demand and steel production in China to move higher next year as domestic and global demand for steel rises. China’s apparent steel demand held up fairly well during the slowdown observed in manufacturing and in commodity demand growth globally, averaging 8% y/y growth ytd (Chart of the Week, bottom panel). It now appears to be stalling in the wake of the global manufacturing slowdown. In addition, Chinese credit stimulus remains weak, contrary to expectations. However, with global industrial activity bottoming and moving higher, and the USD expected to weaken, we expect iron ore demand and steel production in China to move higher next year as domestic and global demand for steel rises.3 Chart 3China Dominates Global Steel Production and Consumption China Dominates Global Steel Production and Consumption China Dominates Global Steel Production and Consumption Chart 4Construction, Real Estate Strength Offset Lower Chinese Auto Production Construction, Real Estate Strength Offset Lower Chinese Auto Production Construction, Real Estate Strength Offset Lower Chinese Auto Production Greater demand for steel by the construction and real estate sectors offset lower consumption by the automobile industry in China this year, as manufacturing and trade slowed globally (Chart 4). Overall, apparent demand is still growing (Chart 5), which will continue to support iron ore imports, even though domestic production of low-grade ore picked up as steelmakers’ margins tightened earlier in the year (Chart 6). Chart 5China"s Apparent Steel Demand Growth Holds Up During Industrial Slowdown China"s Apparent Steel Demand Growth Holds Up During Industrial Slowdown China"s Apparent Steel Demand Growth Holds Up During Industrial Slowdown Chart 6China Iron Ore Imports Remain Stout China Iron Ore Imports Remain Stout China Iron Ore Imports Remain Stout Chinese imports from Brazil have rebounded following the Brumadinho tailings dam collapse in January at Vale’s Córrego do Feijão iron ore mine, which killed close to 300 people. The collapse in margins from steel mills combined with outages to Brazil and Australia high-grade ore exports led to a rise in imports and domestic production of low-grade iron ore. High-Grade Iron Ore Favored; Policy Uncertainty Persists Our overall view for industrial commodities – iron ore, steel, base metals and crude oil – is constructive but not wildly bullish going into next year. Our oil view, for example, calls for a rally in the average price of crude oil next year of ~ 10% from current levels for Brent crude oil, the world benchmark. While we expect global monetary stimulus to offset much of the tightening of financial conditions brought on by the Fed’s rate hikes last year, and China’s de-leveraging campaign of 2017-18, elevated economic uncertainty will keep the USD better bid that it otherwise would be absent the Sino-US trade war and global economic policy uncertainty. This translates into weaker commodity demand, generally, as a strong USD raises local-currency costs for consumers and lowers local-currency production costs for producers. At the margin, both push commodity prices lower. On a relative basis, we expect the more efficient, less-polluting technology likely will be called on to meet higher steel demand – in China and globally – next year, which means higher-grade iron ore will be favored by Chinese steel mills as profitability improves. For iron ore and steel in particular, environmental considerations also are important, given the Chinese government's “Blue Skies Policy” aimed at reducing the country’s high levels of air pollution.4 This policy has led to the forced retirement of older, highly polluting steelmaking capacity, which has been replaced with newer, less-polluting technology that favors high-grade iron ore. However, the application of regulations designed to reduce pollution has been uneven, and still relies on local compliance, which has been spotty. We expect demand for high-grade ore will increase as global manufacturing and trade also recovers. On a relative basis, we expect the more efficient, less-polluting technology likely will be called on to meet higher steel demand – in China and globally – next year, which means higher-grade iron ore will be favored by Chinese steel mills as profitability improves. The restoration of high-grade exports from Brazil means this ore will be available. It is worthwhile noting that these steelmakers account for an increasing share of global capacity. For this reason, we expect demand for high-grade ore will increase as global manufacturing and trade also recovers (Chart 7). Given our view, at tonight’s close we will get long December 2020 high-grade iron-ore futures (65% Fe) traded on the Singapore Exchange vs. short benchmark-grade iron-ore futures (62% Fe) traded on the CME. Both are quoted in USD/MT and settle basis Chinese port-delivery (CFR) indexes in cash. Given the uncertain nature of the durability and depth of the ceasefire currently being negotiated by the US and China, we will keep a stop-loss on this position of 20%. Bottom Line: China’s steel demand has held up relatively well despite the global slowdown in manufacturing and trade. Given our expectation for a pick-up in global growth – in response to global monetary and fiscal stimulus and lower economic uncertainty in the wake of a ceasefire in the Sino-US trade war – we expect Chinese steel demand to resume growing. This will support iron ore prices, particularly for high-grade ores. On the back of this expectation, we are recommending an iron-ore spread trade, going long high-grade futures vs. short benchmark-grade iron ore futures. Chart 7High-Grade Iron Ore Should Outperform Strategically High-Grade Iron Ore Should Outperform Strategically High-Grade Iron Ore Should Outperform Strategically   Robert P. Ryan Chief Commodity & Energy Strategist rryan@bcaresearch.com Hugo Bélanger Senior Analyst Commodity & Energy Strategy HugoB@bcaresearch.com   Market Round-Up Energy: Overweight. Bloomberg reported China is looking to invest between $5-$10 billion in the Saudi Aramco IPO through various vehicles. Such an investment would give China a deeper stake in the Kingdom’s oil industry, and a hedge to price shocks. In addition, it could open the way for deeper investment in the Saudi oil and petchems industries. For KSA, as we have argued in the past, a deepening of China’s investment and involvement in the Kingdom’s economy would diversify the states that have a vested interest in ensuring its safety.5 We will be updating our analysis of China’s pivot to the Middle East, and KSA’s pivot to Asia next week. Separately, we the last of our Brent backwardation trades – i.e., long December 2019 Brent vs. short December 2020 Brent – was closed last week with a gain of 110.8%. Base Metals: Neutral. Copper prices are up 6% vs. last month, supported by supply-side worries in Chile and, more recently, easing trade tensions. Cyclically, we believe copper prices are turning up – spurred by easy monetary conditions and fiscal stimulus directed at infrastructure and construction spending. Most of our key commodity-demand indicators have bottomed and are suggesting EM demand growth will move up. This supports a year-end base metal rally. Precious Metals: Neutral. A risk-on sentiment fueled by expectation the U.S. and China will sign a trade deal weighs on gold’s safe-haven demand. Prices fell 2% since last week. Additionally, U.S. 10-year bond yields shot higher – pushing gold prices lower – on Tuesday following a stronger-than-expect ISM services PMI data release. Gold-backed ETF holdings reached a new record in September at 2,855 MT (up 377 MT ytd), surpassing the December 2012 peak. A reversal in investors’ sentiment towards gold could send prices down. Ags/Softs: Underweight. The USDA reported that 52% of the U.S. corn has been harvested, a 13 percentage point increase relative to last week, yet the figure came shy of analysts’ expectation and far below the 2014-2018 average of 75%. On a weekly basis, corn prices are still down 2% due to drier weather forecast. Soybean harvest did better reaching 75%, and meeting expectations. Soybean price is almost unchanged on a weekly basis, despite having edged higher earlier in the week on the back of rising expectations the US and China will agree on a ceasefire in the ongoing trade war.   Footnotes 1     We measure this uncertainty using the Baker-Bloom-Davis Global Economic Policy Uncertainty (GEPU) index. This is a GDP-weighted index of newspaper headlines containing a list of words related economic uncertainty. Newspapers from 20 countries representing almost 80% of global GDP are scoured for reports reflecting economic uncertainty. Please see our October 17 and October 31, 2019, reports Policy Uncertainty Lifts USD, Stifles Global Oil Demand Growth and Global Financial Conditions Support Higher Commodity Demand for the original research on this topic. Both are available at ces.bcaresearch.com. 2    We discuss deadweight losses to US households arising from the tariffs in Waiting To Get Long Copper, In China’s Steel Slipstream, published August 29, 2019. It is available at ces.bcaresearch.com. 3    BCA Research’s China Investment Strategy expects China’s business cycle likely will bottom in 1Q20 of next year, rather than in 4Q19. This aligns with our expectation. Please see China Macro And Market Review, published November 6, 2019. It is available at cis.bcaresearch.com. 4    We examined the implications of China’s “Blue Skies” policy in China's Anti-Pollution Resolve Critical To Iron Ore Markets, published April 4, 2019. It is available at ces.bcaresearch.com. 5    We discuss these issues in our Special Report entitled ضد الواسطة published November 16, 2018. The Arabic title of the report translates as "Against Wasta." Wasta means reciprocity in formal and informal dealings. Investment Views and Themes Recommendations Strategic Recommendations Tactical Trades TRADE RECOMMENDATION PERFORMANCE IN 2019 Q3 Iron Ore, Steel Prices Set To Lift Iron Ore, Steel Prices Set To Lift Commodity Prices and Plays Reference Table Trades Closed in 2019 Summary of Closed Trades Iron Ore, Steel Prices Set To Lift Iron Ore, Steel Prices Set To Lift

Away from the Sino-U.S. trade-war headlines – and the remarkable commodity price volatility they produce – apparent steel consumption in China is up 9.5% y/y in the first seven months of this year. This is being spurred by fiscal stimulus directed at infrastructure and construction spending, which remains strong relative to year-ago levels (Chart of the Week).1 Demand for copper normally drafts in the wake of China’s steel demand, and picks up when steel-intensive capital projects are being wired for use. In less uncertain times, getting long copper would make sense.2 Chart of the WeekFiscal Stimulus Boosts China Steel Consumption Fiscal Stimulus Boosts China Steel Consumption Fiscal Stimulus Boosts China Steel Consumption We are holding off getting long for now, given the policy uncertainty – particularly in re trade policy – that dominates commodity markets, none moreso than steel and base metals. While the odds of a resolution to the trade war might be edging up from our 40% expectation, moving them closer to those of a coin toss does not justify taking the risk.3 Highlights Energy: Overweight. Retaliatory tariffs on $75 billion of U.S. imports, including crude oil, into China, provoked an additional 5% duty by President Trump on ~ $550 billion of goods shipped to the U.S. by China. This will lift the total tariff on $250 billion of U.S. imports from China to 30%, and on another $300 billion to 15%, starting Oct. 1 and Sept. 1. Following the imposition of Chinese tariffs, China Petroleum & Chemical Corp, or Sinopec, petitioned Beijing for waivers on U.S. crude imports. Base Metals: Neutral. Included in the latest Chinese tit-for-tat tariff retaliations is a 5% tariff increase on copper scrap imports from the U.S., which takes the duty to 30%; the re-imposition of 25% tariffs on U.S. auto imports, and a 5% tariff on auto parts. The latter tariffs go into effect December 15, according to Fastmarkets MB. Precious Metals: Neutral. We are getting long platinum at tonight’s close, but with a tight stop of -10%, given highly volatile – and uncertain – trading markets. In addition to following the wake of safe-haven demand for gold, a physical deficit for platinum is possible.4 Markets have been well supported technically – bouncing off long-term support of ~ $785/oz dating to the depths of the Global Financial Crisis in 2008 – 09. Ags/Softs: Underweight. The USDA reported 57% of the U.S. corn crop is in good or excellent condition this week, vs. 68% a year ago. The Department also reported 55% of the soybean crop was in good or excellent shape vs. 66% last year at this time. Feature Iron ore price surged more than 38.1% y/y, while steel prices rallied in 1Q19 off their year-end 2018 lows, helped by the Central Committee fiscal stimulus directed at infrastructure and construction, which hit the market after the collapse of Vale’s Brumadinho dam in January (Chart 2). The combination of the fatal dam disaster and fiscal stimulus in China lifted prices for iron ore and steel sharply.5 Chart 2Iron Ore and Steel Rally Leaves Copper Behind Iron Ore and Steel Rally Leaves Copper Behind Iron Ore and Steel Rally Leaves Copper Behind Chart 3China's Construction, Real Estate Investment Spur Higher Steel Demand China's Construction, Real Estate Investment Spur Higher Steel Demand China's Construction, Real Estate Investment Spur Higher Steel Demand While policymakers guide domestic markets to expect reduced stimulus for the real-estate sector, we continue to expect copper demand to pick up in the short term. Our modeling indicates strong steel consumption presages higher copper consumption, especially when construction’s contribution is high (Chart 3). This is because the projects accounting for that consumption typically are fitted out with electrical wiring six months or so after the structures built with all that steel are made ready for residential or commercial use (Chart 4).6 This should support copper prices as we go through 2H19, although a slowdown in steel’s apparent consumption in 1Q19 followed by a rebound in April could make for a bumpy ride. CPC Central Committee guidance is stressing the need to get stimulus to the “real economy, such as privately-owned manufacturers and high-tech firms, which are the engines of long-term growth.”7 Still, while policymakers guide domestic markets to expect reduced stimulus for the real-estate sector, we continue to expect copper demand to pick up in the short term, as completed construction and infrastructure and projects in the pipeline from past stimulus are made ready for use.8 Chart 4Higher Steel Demand Normally Presages Higher Copper Demand Higher Steel Demand Normally Presages Higher Copper Demand Higher Steel Demand Normally Presages Higher Copper Demand   Copper Puzzle: Why Was It Left Behind? Part of the explanation for copper’s lackluster relative performance likely is USD-related: A strong dollar will reduce demand. Prices for iron ore and steel have come back to earth, following their impressive rallies this year. However, as Chart 2 illustrates, copper prices languished, and retreated to $2.50/lb on the COMEX. This, despite a contraction of physical copper concentrates supply, which kept copper treatment and refining charges (TC/RC) close to record lows, and inventories tight globally (Chart 5).9 Part of the explanation for copper’s lackluster relative performance likely is USD-related: A strong dollar will reduce demand (Chart 6).10 Our House view continues to expect the U.S. Fed to deliver a 25bp rate cut at its mid-September meeting. This could be followed by additional easing if Sino-U.S. trade tensions persist or get worse. Our House view expects Fed easing and a recovery in EM GDP growth will weaken the USD later this year. As iron ore shipments pick up from Brazil and Australia, we would expect pressure on those prices as the additional supply arrives at Chinese docks, and residential construction wanes (Chart 7). This should, in relative terms, mean copper outperforms iron ore, all else equal, since copper supplies and inventories are contracting. And, as construction spending moderates and winter restrictions on steel mills go into effect, we would expect copper to outperform steel. Chart 5Global Copper Inventories Remain Tight Global Copper Inventories Remain Tight Global Copper Inventories Remain Tight   Chart 6Strong USD Restrains Base Metal Demand Strong USD Restrains Base Metal Demand Strong USD Restrains Base Metal Demand Chart 7China's Iron Ore Imports Remain Strong China's Iron Ore Imports Remain Strong China's Iron Ore Imports Remain Strong Lastly, we would note from a technical perspective that copper has been – and remains – oversold (Chart 8). This could reflect the fact that, among base metals, it has the deepest liquidity, so that when hedgers or speculators are looking for a way to hedge trade-war risk vis-à-vis China – or to simply take a view on EM GDP prospects – copper is the preferred vehicle. It still is too early to wade into buying based on technicals, and, historically, copper has dipped further into oversold territory than where it now sits. But continued excursions into oversold territory will get our attention, and incline us to revisit our bullish bias. Chart 8Technically, Copper's Oversold Technically, Copper's Oversold Technically, Copper's Oversold   Trade War Deadweight The foregoing analysis suggests copper is due to rally. That is our expectation, at any rate. But uncertainty re the Sino-U.S. trade war and other exogenous policy issues – chiefly increasing recession risks arising from higher tariffs on Chinese imports to the U.S., a possible oil-price spike driven by military action in the Persian Gulf, and a disorderly Brexit – forces us to stand aside. Back in May, the N.Y. Fed conducted an analysis of U.S. President Donald Trump’s increase in tariff rates on $200 billion of Chinese imports from 10% to 25%.11 The N.Y. Fed estimated this increase in the tariff rates on that $200 billion would cost the average American household $831/yr, owing to a sharp increase in the deadweight loss arising from the increase. The deadweight loss estimated by the bank arising from tariff increase on the $200 billion of goods subject to the duty went from $132/household/year to $620/household/year. This means the total cost of the tariffs on the $200 billion of goods went from $414/household/year to $831/household/year. The N.Y. Fed notes: Economic theory tells us that deadweight losses tend to rise more than proportionally as tariffs rise because importers are induced to shift to ever more expensive sources of supply as the tariffs rise. Very high tariff rates can thereby cause tariff revenue to fall as buyers of imports stop purchasing imports from a targeted country and seek out imports from (less efficient) producers in other countries. The deadweight loss that comes from importers being forced to buy tariffed goods from higher-cost suppliers is, in other words, highly non-linear. This latest round of tariff increases is being levied on $550 billion of imports come September 1 and October 1. According to the Urban-Brookings Tax Policy Center, a Washington-based research joint-venture between the Urban Institute and the Brookings Institute, U.S. middle-class households earning $50k to $85k, received an average income tax cut of about $800 last year following passage of the 2017 Tax Cuts and Jobs Act (TCJA), which was signed in to law by President Trump December 22, 2017.12 Further increasing tariffs, as proposed, means the after-tax income of average U.S. households will contract, as the total cost of tariffs overwhelms the value of TCJA tax cuts for middle-income households, if they are imposed as scheduled. China's economy is struggling under the strain of the trade war, as it overlaps with President Xi’s reform and deleveraging campaign of 2017-18.  While these campaigns have been postponed, the lingering effects are weighing on growth.  In addition, banks and corporations appear to be backing away from taking on new risks. The state’s reflationary measures, including a big boost to local government spending, have so far been merely sufficient for domestic stability.12 Bottom Line: Fundamentals and technicals align to support copper prices. However, given the uncertainty surrounding the evolution of the Sino-U.S. trade war we are staying on the sidelines, and avoiding putting on a long position at present. Rising tariffs by the U.S. and China increases the risk of recession in both countries.   Robert P. Ryan, Chief Commodity & Energy Strategist rryan@bcaresearch.com   Footnotes 1      In Copper Will Benefit Most From Chinese Stimulus, published April 25, 2019, we noted China would deploy $300 billion (~ 2 trillion RMB) to support policymakers’ GDP growth targets this year. See also the June 2019 issue of Resources and Energy Quarterly, published by the Australian Government’s Department of Industry, Innovation and Science, particularly Section 3 beginning on p. 22. 2      We are referring to Knightian uncertainty here, a distinction developed by economist Frank Knight in his 1921 book "Risk, Uncertainty and Profit". Uncertainty in Knight’s sense refers to a risk that is “not susceptible to measurement,” per the MIT.edu reference above. This differs from the “risk” we routinely consider in this publication, which can be measured via implied volatilities in options markets. A pdf of the book can be downloaded at the St. Louis Fed’s FRASER website. 3      These odds were calculated by BCA Research’s Geopolitical Strategy group. For a discussion, please see our article entitled Expanded Sino – U.S. Trade War Could Be Bullish For Base Metals, published May 9, 2019. It is available at ces.bcaresearch.com. 4      This is not a certainty. In its PGM Market Report for May 2019, Johnson Matthey, the platinum-group metals refiner, forecast a slight physical platinum deficit this year of ~ 4MT, while Metals Focus expects a 20MT surplus. 5      The Australian Government DIIS report footnoted above (fn 1) states, “Production growth in China was driven by stimulatory government spending, which focused on higher infrastructure investment and boosting construction activity.” This is consistent with our framework for analyzing Chinese bulks (iron ore and steel) and base metals markets: Steel production and consumption are directed by the Communist Party of China (CPC) Central Committee, which motivates us to treat China’s steel market as a unified vertically integrated industry. Chinese steel production, accounts for ~ 50% of the global total. Its strong showing this year pushed world steel production up ~ 5% y/y in the first five months of this year, according to the DIIS. 6      In our modeling of copper prices, we lag steel apparent consumption by six months. 7      Please see Property sector cooling to help real economy funding, published by China Daily on August 1, 2019. 8      BCA Research’s China Investment Strategy noted, “The July Politburo statement signaled a greater willingness to stimulate the economy; as a result, we are penciling in a slightly more optimistic scenario on forthcoming credit growth through the remainder of the year, by adding 300 billion yuan of debt-to-bond swaps and 800 billion yuan of extra infrastructure spending to our baseline estimate for the rest of 2019. However, this would only add a credit impulse equivalent of 1 percentage point of nominal GDP and would only marginally reduce the probability of an earnings recession to 40%.” Please see Don’t Bottom-Fish Chinese Assets (Yet), published August 14, 2019. It is available at cis.bcaresearch.com. 9      The International Copper Study Group reported world mine production fell ~ 1% in the January – May 2019 period to ~ 8.3mm MT. Global refined copper production also was down ~ 1% to 9.8mm MT, while refined copper usage was down less than 1% over the same period. China’s refined usage – ~ 50% of world demand – was up 3.5%. 10   Our modeling indicates a 1% y/y increase in the broad trade-weighted USD translates into a 0.7% y/y decrease in the price of copper. Iron ore also is affected by USD levels, but price formation in this market is dominated by the overwhelming influence of Chinese demand on the seaborne iron-ore market, which accounts for close to 70% of global demand. For steel, China accounts for slightly more than half of global supply and demand, which somewhat insulates it from USD effects. 11   Please see New China Tariffs Increase Costs to U.S. Households, published by the N.Y. Fed May 23, 2019. 12   Please see Big Trouble In Greater China, a Special Report published by BCA Research's Geopolitical and China Investment strategies August 23, 2019.  It is available at gps.bcaresearch.com. Investment Views and Themes Recommendations Strategic Recommendations Tactical Trades TRADE RECOMMENDATION PERFORMANCE IN 2019 Q2 Image Commodity Prices and Plays Reference Table Trades Closed in 2019 Summary of Closed Trades Image

Chart II-1Is Deflation In Steel And Coal Back? Is Deflation In Steel And Coal Back? Is Deflation In Steel And Coal Back? Unlike 2015 when steel, iron ore and coal prices collapsed, in the current downturn they have so far held up reasonably well. They have begun falling only recently (Chart II-1). Even though we do not anticipate a 2015-type Armageddon in steel, iron ore and coal prices, they will deflate further due to supply outpacing demand in China. For both steel and coal, the pace of “de-capacity” reforms in China has diminished considerably, with declining shutdowns of inefficient capacity and rising advanced capacity, as we argued in a couple of reports last year.  This has led to a faster growth in supply, while demand has been dwindling with weak economic growth. Lower steel, iron ore and coal prices will harm Chinese and global producers along with their respective countries.1 Steel And Iron Ore First, both crude steel and steel products output will likely grow at a pace of 5-7% (Chart II-2). As the 2016-2020 steel de-capacity target (150 million tons capacity reduction) was already achieved by the end of 2018, the scale of further shutdowns will be limited. In addition, collapsing graphite electrode prices reflect an increased supply of this material. This along with more availability of scrap steel will facilitate the continuing expansion of cleaner technology (electric furnace (EF)) steel capacity and their output in China. The newly added EF steel capacity is planned at about 21 million tons in 2019 (representing 1.8% of official aggregate steel production capacity), slightly lower than the 25 million tons in 2018. Second, we expect steel products demand to grow at 3-5%, slightly weaker than output. Construction accounts for about 55% of Chinese final steel demand, with about 35% stemming from the property market and 20% from infrastructure. The automotive sector contributes about 10% of final Chinese steel demand. All of these end markets are weak and do not yet show signs of revival (Chart II-3). Chart II-2Steel Production In China Steel Production In China Steel Production In China Chart II-3No Recovery In Chinese Demand No Recovery In Chinese Demand No Recovery In Chinese Demand   Concerning iron ore price, we expect more downside than in steel. Supply disruptions among Brazilian and Australian producers were the main cause for the significant rally in iron ore prices this year. Evidence is that these producers have already resumed their output recovery. Current iron ore prices are still well above marginal production costs of major global iron ore producers. Besides, ongoing large currency depreciation in commodity producing countries will push down their marginal production costs in U.S. dollars terms. This will encourage further supply.  As China has increased its use of scrap steel in its crude steel production, the country’s iron ore demand has not grown much. In fact, imports of this raw material have contracted (Chart II-4) As scrap steel prices are currently very low relative to the price of imported iron ore (Chart II-5), steel producers in China will continue to use scrap steel instead of iron ore. Chart II-4China's Imports Of Iron Ore Have Been Shrinking China's Imports Of Iron Ore Have Been Shrinking China's Imports Of Iron Ore Have Been Shrinking Chart II-5Scrap Steel Is A Cheap Substitute For Iron Ore Scrap Steel Is A Cheap Substitute For Iron Ore Scrap Steel Is A Cheap Substitute For Iron Ore   Coal Chart II-6Coal Output Is Rising, But Beijing's Goal To Reduce Its Usage Coal Output Is Rising, But Beijing's Goal To Reduce Its Usage Coal Output Is Rising, But Beijing's Goal To Reduce Its Usage Chinese coal prices will also be under downward pressure. First, coal output growth will likely slow but will still stand at 2-4% down from a current 6% level (Chart II-6, top panel). The government has set a production goal of 3900 million tons for 2020. Given last year’s output of 3680 million tons, this implies only a 2.9% annual growth rate this year and the next. Second, the demand for both thermal coal and coking coal will likely weaken. They account for 80% and 20% of total coal demand, respectively. About 60% of Chinese coal is used to generate thermal power. As the country continues to promote the use of clean energy, thermal power output growth will likely slow further. Increasing the nation’s reliance on clean energy is an imperative strategic objective for Beijing. Given that thermal coal still accounts for a whopping 70% of electricity production, China will maintain its effort on reducing coal in its energy mix (Chart II-6, bottom panel). In the same vein, the government will continue to replace coal with natural gas in home heating. Finally, Chinese coal import volumes are likely to decline as the nation is increasingly relying on its domestic sources. In particular, the strategic Menghua railway construction will be completed in October. It will be used to transport the commodity from large producers in the north to the coal-deficit provinces in the south. This will reduce the nation’s coal imports, as the transportation cost of shipping domestic coal to the southern power plants will become more competitive than imported coal. Macro And Investment Implications First, companies and economies producing these commodities will face deflationary pressures. These include - but are not limited to - Indonesia, Australia, Brazil and South Africa, as well as steel producers around the world. Second, the RMB depreciation will allow China to gain further market share in the global steel market. In fact, China’s share of global steel output has been rising (Chart II-7, top panel). The bottom panel of Chart II-7 shows that steel production in the world excluding China have actually come to a grinding halt at a time when mainland producers have enjoyed high output growth. Global steel stocks have broken down and global mining equities are heading into a breakdown (Chart II-8). Chart II-7China Has Been Gaining A Share In Global Steel Market China Has Been Gaining A Share In Global Steel Market China Has Been Gaining A Share In Global Steel Market Chart II-8Breakdown In Steel And Mining Stocks Breakdown In Steel And Mining Stocks Breakdown In Steel And Mining Stocks   Finally, we remain bearish on commodities and other global growth sensitive currencies. In particular, we continue shorting the following basket of EM currencies against the U.S. dollar: ZAR, CLP, COP, IDR, MYR and KRW. Ellen JingYuan He, Associate Vice President ellenj@bcaresearch.com Footnotes 1      This is BCA’s Emerging Markets Strategy view and is different from BCA’s house view.

Highlights The current global trade downtrend has primarily been due to a contraction in Chinese imports. The latter reflects weakness in China's domestic demand in general and capital spending in particular. The current global manufacturing and trade downturns will prove to be drawn out. Several important markets have already experienced technical breakdowns, and a few others are at risk of doing so. EM domestic bonds and EM credit markets could be the last shoe to drop in this EM selloff. Steel, iron ore and coal prices, will all deflate further due to supply outpacing demand in China. Feature In our report last week, we argued that the odds of a liquidation phase in EM are growing. This week’s report continues exploring this theme, offering additional rationale and evidence of a pending breakdown in EM. Trade Tariffs: The Wrong Focus? The media and many investors seem to be solely focused on the impact of U.S. tariffs against imports from China. Yet these tariffs have not been the primary cause of the ongoing global manufacturing and trade recessions. It appears that the headlines and many investors are looking at individual trees and ignoring the forest. Chart I-1Chinese Imports Are Worse Than Exports Chinese Imports Are Worse Than Exports Chinese Imports Are Worse Than Exports Global trade contraction and China’s growth slump are not solely due to the trade tariffs imposed by the U.S. but rather stem from weakening domestic demand in China. Chart I-1 illustrates that Chinese aggregate exports are faring much better than imports. If the imposed tariffs were the main culprit behind both weakness in Chinese growth and global trade, mainland exports would have registered a far-greater hit by now than imports. However, they have not yet done so. This entails that U.S. tariffs have so far not had a substantial impact on Chinese and global manufacturing. The key point we would like to emphasize is that the current global trade downtrend has primarily been due to a contraction in Chinese imports. In turn, the accelerating decline in mainland imports is a reflection of relapsing domestic demand in China. The latter has been instigated by lethargic money/credit impulses owing to the government’s 2017-2018 deleveraging campaign and its reluctance to undertake an economy-wide irrigation type stimulus. What’s more, the recent RMB depreciation will likely intensify the Chinese import contraction already underway, as the same amount of yuan will buy less goods priced in U.S. dollars than before (Chart I-2). Given the majority of goods and commodities procured by mainland companies are priced in dollars, suppliers will receive fewer dollars, and their revenue derived from sales to and in China will continue to shrink (Chart I-3). Chart I-2RMB Depreciation Will Depress China's Purchases From Rest Of The World RMB Depreciation Will Depress China's Purchases From Rest Of The World RMB Depreciation Will Depress China's Purchases From Rest Of The World Chart I-3China Is In A Recession From Perspective Of Its Suppliers China Is In A Recession From Perspective Of Its Suppliers China Is In A Recession From Perspective Of Its Suppliers   We do not deny that the trade war has prompted a deterioration in sentiment among Chinese businesses and consumers as well as multinational companies, which in turn has dented both their spending and global trade. We do not see these issues reversing anytime soon. If the imposed tariffs were the main culprit behind both weakness in Chinese growth and global trade, mainland exports would have registered a far-greater hit by now than imports. Chart I-4EM EPS Are Contracting EM EPS Are Contracting EM EPS Are Contracting Even though U.S. President Donald Trump is flip-flopping on tariffs and their implementation, barring a major deal between the U.S. and China, business sentiment worldwide will not improve on a dime. In brief, delaying some import tariffs from September to December is unlikely to promote an imminent global trade recovery. The confrontation between the U.S. and China is profoundly not about trade: it is a geopolitical confrontation for global hegemony that will last years if not decades. Businesses in China and CEOs of multinational companies realize this, and they will not change their investment plans on Trump’s latest tweet delaying some tariffs. For now, we do not detect signs of an impending growth turnaround in China’s domestic demand and global trade. Therefore, China-related risk assets, commodities and global cyclicals are at risk of breaking down. Economic Rationale The global trade and manufacturing recession will linger for a while longer, and a recovery is not in the offing: The business cycle in EM/China continues to downshift. Consistently, corporate earnings are already or soon will be contracting in EM, China and the rest of emerging Asia (Chart I-4). EM corporate EPS contraction is broad-based (Chart I-5A and I-5B). The recent declines in oil and base metals prices entail earnings shrinkage for energy and materials companies (Chart I-5B, bottom two panels). Chart I-5AEM EPS Contraction Is Broad Based EM EPS Contraction Is Broad Based EM EPS Contraction Is Broad Based Chart I-5BEM EPS Contraction Is Broad Based EM EPS Contraction Is Broad Based EM EPS Contraction Is Broad Based   China’s monetary and fiscal stimulus has not yet been sufficient to revive capital spending in general and construction activity in particular (Chart I-6). Chinese household spending is also exhibiting little signs of recovery (Chart I-7). Chart I-6China: Building Construction Is Dwindling China: Building Construction Is Dwindling China: Building Construction Is Dwindling Chart I-7China: Consumer Spending Has Not Yet Recovered China: Consumer Spending Has Not Yet Recovered China: Consumer Spending Has Not Yet Recovered   Domestic demand continues to deteriorate, not only in China but also in other emerging economies, as we documented in our July 25 report. In EM ex-China, imports of capital goods and auto sales are contracting (Chart I-8). High-frequency freight data point to ongoing weakness in shipments in both the U.S. and China (Chart I-9). Chart I-8EM Ex-China: Domestic Demand Is Depressed EM Ex-China: Domestic Demand Is Depressed EM Ex-China: Domestic Demand Is Depressed Bottom Line: The current global manufacturing and trade downturns will prove to be drawn out, and investors should be wary of betting on an impending recovery. This is BCA’s Emerging Markets Strategy view and is different from BCA’s house view which is anticipating an imminent global business cycle recovery. Chart I-9Global Freight Does Not Signal Recovery Global Freight Does Not Signal Recovery Global Freight Does Not Signal Recovery   Breakdown Watch Financial market segments sensitive to the global business cycle have been splintering at the edges. These cracks appear to be proliferating to the center and will render considerable damage to aggregate equity indexes. EM corporate EPS contraction is broad-based. We explained our rationale behind using long-term moving averages to identify significant breakouts and breakdowns in last week’s report. We also highlighted the numerous breakdowns that have already transpired. Today, we supplement the list: EM equity relative performance versus DM has fallen below its previous lows (Chart I-10, top panel). Crucially, emerging Asian stocks’ relative performance versus DM has clearly breached its 2015-2016 lows (Chart I-10, bottom panel). The KOSPI and Chinese H-share indexes have broken below their three-year moving averages (Chart I-11, top two panels). Chart I-10EM Equities Relative Performance Has Broken Down EM Equities Relative Performance Has Broken Down EM Equities Relative Performance Has Broken Down Chinese bank stocks in particular have been responsible for dragging China’s H-share index lower (Chart I-11, bottom panel). In addition, Chinese small-cap stocks dropped below their December low, as have copper prices and our Risk-On versus Safe-Haven currency ratio1 (Chart I-12). Finally, German chemical and industrial share prices such as BASF, Siemens and ThyssenKrupp have decisively broken down (Chart I-13). Chart I-11Breakdowns In Korea And China... Breakdowns In Korea And China... Breakdowns In Korea And China...   Chart I-12...In Commodities Space As Well bca.ems_wr_2019_08_15_s1_c12 bca.ems_wr_2019_08_15_s1_c12 Chart I-13German Manufacturing Stocks Are In Free Fall German Manufacturing Stocks Are In Free Fall German Manufacturing Stocks Are In Free Fall   This implies that Germany’s manufacturing slowdown is not limited to the auto sector but rather is pervasive. Besides, these companies are greatly exposed to China/EM demand, and their share prices simply reflect the ongoing slump in China/EM capital spending. There are several other market signals that are at a critical technical juncture, and their move lower will confirm our downbeat view on global growth and cyclical markets. In particular: The global stocks-to-U.S. Treasurys ratio has dropped to a critical technical line (Chart I-14, top panel). Failure to hold this defense line would signal considerable downside in global cyclical assets. Similarly, the Chinese stock-to-bond ratio – calculated using total returns of both the MSCI China All-Share index and domestic government bonds – has plunged. The path of least resistance for this ratio might be to the downside (Chart I-14, bottom panel). Given China is the epicenter of the global slowdown, this ratio is of vital importance. The lack of recovery in this ratio signifies lingering downside growth risks. Finally, global cyclical sectors’ relative performance versus defensive ones is sitting on its three-year moving average (Chart I-15). A move lower will qualify as a major breakdown and confirm the absence of a global manufacturing and trade recovery. Chart I-14Global Stocks-To-Bonds Ratio: Sitting On Edge Global Stocks-To-Bonds Ratio: Sitting On Edge Global Stocks-To-Bonds Ratio: Sitting On Edge Chart I-15Global Cyclicals Versus Defensives: At A Critical Juncture Global Cyclicals Versus Defensives: At A Critical Juncture Global Cyclicals Versus Defensives: At A Critical Juncture   Bottom Line: Several important markets have already experienced technical breakdowns, and a few others are at risk of doing so. All in all, these provide us with confidence in maintaining our downbeat stance on EM risk assets and currencies. EM Bonds: The Last Shoe To Drop? Although EM share prices are back to their December lows, EM local currency and U.S. dollar bonds have done well this year, benefiting from the indiscriminate global bond market rally. However, there are limits to how far and for how long the performance of EM domestic and U.S. dollar bonds can diverge from EM stocks, currencies and commodities prices (Chart I-16). EM domestic bond yields have plunged close to the 2013 lows they touched prior to the Federal Reserve’s ‘Taper Tantrum’ selloff (Chart I-17, top panel). That said, on a total return basis in common currency terms, the GBI EM domestic bond index has not outperformed U.S. Treasurys, as shown in the bottom panel of Chart I-17. Chart I-16Which Way These Gaps Will Close? Which Way These Gaps Will Close? Which Way These Gaps Will Close? Chart I-17EM Domestic Bonds: Poor Risk-Reward Profile EM Domestic Bonds: Poor Risk-Reward Profile EM Domestic Bonds: Poor Risk-Reward Profile   Looking forward, EM exchange rates remain critical to the returns of this asset class. With the GBI EM local currency bond index’s yield spread over five-year U.S. Treasurys at about 400 basis points, EM currencies have very little room to depreciate before foreign investors begin experiencing losses. We believe that further RMB depreciation, commodities prices deflation and EM exports contraction all bode ill for EM exchange rates. Consequently, we expect EM local bonds to underperform U.S. Treasurys of similar duration over the next several months. German chemical and industrial share prices such as BASF, Siemens and ThyssenKrupp have decisively broken down. Finally, the euro has begun rapid appreciation versus EM currencies. This will erode EM local bonds’ returns to European investors and trigger a period of outflows. Within this asset class, our overweights are Mexico, Russia, Central Europe, Chile, Korea and Thailand, while we continue to recommend underweight positions in the Philippines, Indonesia, Turkey, South Africa, Brazil, Argentina and Peru within an EM local currency bond portfolio. As to EM credit space (hard currency bonds), these markets are overbought, and investors positioning is heavy. EM currency depreciation and lower commodities prices typically herald widening spreads. Argentina has a large weight in the EM credit indexes, and the crash in Argentine markets could be a trigger for outflows from this asset class. Technically speaking, there are already several negative signposts. The excess returns on EM sovereign and corporate bonds seem to have rolled over, having failed to surpass their early 2018 highs (Chart I-18). Besides, EM sovereign CDS spreads are breaking out (Chart I-19, top panel). Chart I-18EM Credit Markets Is Toppy EM Credit Markets Is Toppy EM Credit Markets Is Toppy Chart I-19EM Credit Space Is Entering Selloff EM Credit Space Is Entering Selloff EM Credit Space Is Entering Selloff   Finally, there are noticeable cracks in the emerging Asian corporate credit market. The price index of China’s high-yield property bonds – that account for a very large portion not only of the Chinese but also the emerging Asian corporate bond universes – has petered out at an important technical resistance level (Chart I-19, bottom panel). Further, the relative total return of emerging Asia’s investment-grade corporate bonds against their high-yield peers is correlated with Asia corporate spreads, and presently points to wider spreads (Chart I-20). The rationale is that periods when safer parts of the credit universe outperform the riskier ones are usually associated with widening credit spreads. China’s property market remains vulnerable as the central authorities in Beijing have not provided much housing-related stimulus in the current downtrend. Furthermore, companies in this space are overleveraged, generate poor cash flow and have limited access to credit. The euro has begun rapid appreciation versus EM currencies. This will erode EM local bonds’ returns to European investors and trigger a period of outflows. Overall, Chinese property developers will affect the EM credit space in two ways. First, their credit spreads will likely continue to shoot up, generating investor anxiety and outflows from this asset class. Second, reduced investment by debt-laden and cash-strapped property developers will inflict pain on industrial and materials companies in Asia and beyond. We discuss the outlook for steel, iron ore and coal, which are very exposed to Chinese construction, in the section below. Bottom Line: For asset allocators, we recommend underweighting EM sovereign and corporate credit versus U.S. investment grade, a strategy we have been advocating since August 16, 2017 (Chart I-21). For dedicated portfolios, the list of our overweights and underweights, as always, is presented at the end of the report (page 21). Chart I-20Emerging Asian Corporate Spreads Will Widen Emerging Asian Corporate Spreads Will Widen Emerging Asian Corporate Spreads Will Widen Chart I-21Favor U.S. Investment Grade Versus EM Overall Credit Favor U.S. Investment Grade Versus EM Overall Credit Favor U.S. Investment Grade Versus EM Overall Credit   As for EM domestic bonds, we continue to recommend betting on yield declines in select countries without taking on currency risk. These include Korea, Chile, Mexico and Russia. We will warm up to this asset class in general when we alter our negative EM currency view. Arthur Budaghyan Chief Emerging Markets Strategist arthurb@bcaresearch.com Chinese Steel, Iron Ore And Coal Markets: Renewed Deflation Chart II-1Is Deflation In Steel And Coal Back? Is Deflation In Steel And Coal Back? Is Deflation In Steel And Coal Back? Unlike 2015 when steel, iron ore and coal prices collapsed, in the current downturn they have so far held up reasonably well. They have begun falling only recently (Chart II-1). Even though we do not anticipate a 2015-type Armageddon in steel, iron ore and coal prices, they will deflate further due to supply outpacing demand in China. For both steel and coal, the pace of “de-capacity” reforms in China has diminished considerably, with declining shutdowns of inefficient capacity and rising advanced capacity, as we argued in a couple of reports last year.  This has led to a faster growth in supply, while demand has been dwindling with weak economic growth. Lower steel, iron ore and coal prices will harm Chinese and global producers along with their respective countries.2 Steel And Iron Ore First, both crude steel and steel products output will likely grow at a pace of 5-7% (Chart II-2). As the 2016-2020 steel de-capacity target (150 million tons capacity reduction) was already achieved by the end of 2018, the scale of further shutdowns will be limited. In addition, collapsing graphite electrode prices reflect an increased supply of this material. This along with more availability of scrap steel will facilitate the continuing expansion of cleaner technology (electric furnace (EF)) steel capacity and their output in China. The newly added EF steel capacity is planned at about 21 million tons in 2019 (representing 1.8% of official aggregate steel production capacity), slightly lower than the 25 million tons in 2018. Second, we expect steel products demand to grow at 3-5%, slightly weaker than output. Construction accounts for about 55% of Chinese final steel demand, with about 35% stemming from the property market and 20% from infrastructure. The automotive sector contributes about 10% of final Chinese steel demand. All of these end markets are weak and do not yet show signs of revival (Chart II-3). Chart II-2Steel Production In China Steel Production In China Steel Production In China Chart II-3No Recovery In Chinese Demand No Recovery In Chinese Demand No Recovery In Chinese Demand   Concerning iron ore price, we expect more downside than in steel. Supply disruptions among Brazilian and Australian producers were the main cause for the significant rally in iron ore prices this year. Evidence is that these producers have already resumed their output recovery. Current iron ore prices are still well above marginal production costs of major global iron ore producers. Besides, ongoing large currency depreciation in commodity producing countries will push down their marginal production costs in U.S. dollars terms. This will encourage further supply.  As China has increased its use of scrap steel in its crude steel production, the country’s iron ore demand has not grown much. In fact, imports of this raw material have contracted (Chart II-4) As scrap steel prices are currently very low relative to the price of imported iron ore (Chart II-5), steel producers in China will continue to use scrap steel instead of iron ore. Chart II-4China's Imports Of Iron Ore Have Been Shrinking China's Imports Of Iron Ore Have Been Shrinking China's Imports Of Iron Ore Have Been Shrinking Chart II-5Scrap Steel Is A Cheap Substitute For Iron Ore Scrap Steel Is A Cheap Substitute For Iron Ore Scrap Steel Is A Cheap Substitute For Iron Ore   Coal Chart II-6Coal Output Is Rising, But Beijing's Goal To Reduce Its Usage Coal Output Is Rising, But Beijing's Goal To Reduce Its Usage Coal Output Is Rising, But Beijing's Goal To Reduce Its Usage Chinese coal prices will also be under downward pressure. First, coal output growth will likely slow but will still stand at 2-4% down from a current 6% level (Chart II-6, top panel). The government has set a production goal of 3900 million tons for 2020. Given last year’s output of 3680 million tons, this implies only a 2.9% annual growth rate this year and the next. Second, the demand for both thermal coal and coking coal will likely weaken. They account for 80% and 20% of total coal demand, respectively. About 60% of Chinese coal is used to generate thermal power. As the country continues to promote the use of clean energy, thermal power output growth will likely slow further. Increasing the nation’s reliance on clean energy is an imperative strategic objective for Beijing. Given that thermal coal still accounts for a whopping 70% of electricity production, China will maintain its effort on reducing coal in its energy mix (Chart II-6, bottom panel). In the same vein, the government will continue to replace coal with natural gas in home heating. Finally, Chinese coal import volumes are likely to decline as the nation is increasingly relying on its domestic sources. In particular, the strategic Menghua railway construction will be completed in October. It will be used to transport the commodity from large producers in the north to the coal-deficit provinces in the south. This will reduce the nation’s coal imports, as the transportation cost of shipping domestic coal to the southern power plants will become more competitive than imported coal. Macro And Investment Implications First, companies and economies producing these commodities will face deflationary pressures. These include - but are not limited to - Indonesia, Australia, Brazil and South Africa, as well as steel producers around the world. Second, the RMB depreciation will allow China to gain further market share in the global steel market. In fact, China’s share of global steel output has been rising (Chart II-7, top panel). The bottom panel of Chart II-7 shows that steel production in the world excluding China have actually come to a grinding halt at a time when mainland producers have enjoyed high output growth. Global steel stocks have broken down and global mining equities are heading into a breakdown (Chart II-8). Chart II-7China Has Been Gaining A Share In Global Steel Market China Has Been Gaining A Share In Global Steel Market China Has Been Gaining A Share In Global Steel Market Chart II-8Breakdown In Steel And Mining Stocks Breakdown In Steel And Mining Stocks Breakdown In Steel And Mining Stocks   Finally, we remain bearish on commodities and other global growth sensitive currencies. In particular, we continue shorting the following basket of EM currencies against the U.S. dollar: ZAR, CLP, COP, IDR, MYR and KRW. Ellen JingYuan He, Associate Vice President ellenj@bcaresearch.com   Footnotes 1          Average of CAD, AUD, NZD, BRL, CLP & ZAR total return (including carry) indices relative to average of JPY & CHF total returns. 2      This is BCA’s Emerging Markets Strategy view and is different from BCA’s house view. Equities Recommendations Currencies, Fixed-Income And Credit Recommendations

Highlights As long as Chinese policymakers remain committed to their anti-pollution campaign, we believe high-grade iron ore prices will remain supported by demand from newer steelmaking technologies. A continuation of the much-needed consolidation in steelmaking capacity in China – wherein larger, more efficient operators force their less competitive rivals from the market – will reinforce this trend (Chart of the Week). Chart of the WeekChina's Steel Sector Will Continue Consolidating China's Steel Sector Will Continue Consolidating China's Steel Sector Will Continue Consolidating Over time, the iron ore market will resemble other developed markets – e.g., crude oil – where higher- and lower-grades of the commodity are regularly traded against each other (Chart 2). As this develops, hedgers and investors will be able to fine tune exposures with greater precision, and prices from these markets will better reflect supply-demand fundamentals. The central and local governments also will have a valuable window on how policy is affecting fundamentals as they pursue their “blue skies” policies. We are initiating tactical spread, getting long spot high-grade 65% Fe vs. short spot 62% Fe at today’s Custeel Seaborne Iron Ore Price Index levels, consistent with our view.1 Chart 2Iron Ore Spread Markets Will Continue To Develop Iron Ore Spread Markets Will Continue To Develop Iron Ore Spread Markets Will Continue To Develop Highlights Energy: Overweight. The Trump administration is reviving the Monroe Doctrine with its demand Russia remove its troops and advisors from Venezuela immediately, based on comments by the U.S. National Security Advisor John Bolton. In addition, a “senior administration official” said waivers for eight of Iran’s largest crude oil importers could be allowed to expire May 4, and that the administration is considering additional sanctions against Iran.2 Brian Hook, the special U.S. envoy for Iran, this week said three of eight countries granted waivers to U.S. sanctions agreed to take oil imports to zero.3 In a related development, OPEC crude oil output fell to a four-year low of 30.4mm b/d in March, according to a Reuters’s survey, as Venezuelan output falls and Saudi Arabia continues to over-deliver on its production cuts. Base Metals: Neutral. Codelco’s mined copper ore output fell to 1.8mm MT last year, down 1.6% vs. 2017 levels. This took refined output down almost 3% to 1.7mm MT, according to Metal Bulletin. The Chilean state-owned company cited reduced ore content in its mined production as a reason for the decline. MB’s copper treatment and refining charges index for the Asia Pacific region is at its lowest level since March 26, 2018, reflecting the lower concentrate supplies. We remain long spot copper on the back of low inventories, and an expected recovery in demand. Precious Metals: Neutral. Strength in equities has taken some of the luster off gold’s rally in the near term as investors move to increase stock exposures, but we continue to favor gold as a portfolio hedge and remain long. Agriculture: Underweight. USDA’s corn planting intentions report released last week came in much stronger than earlier estimates. Corn and soybeans traded lower following the release of the report, but recovered some this week on the back of positive news from Sino - U.S. trade talks. The USDA estimated farmers intended to plant 92mm acres of corn, and 85mm acres of soybeans this year. Ahead of the report, a Farm Bureau survey estimated corn and soybean acreage would average 91.3mm acres of corn and 86.2mm acres of beans. Trade Recommendations: Our 1Q19 trade recommendations were up an average of 41% at end-March (Quarterly Performance Table below). Including recommendations that were open at the beginning of 1Q19, the average was 31%. Feature China’s push to reduce pollution in its steelmaking sector will continue to support demand for Brazil’s high-grade ores – i.e., ores with iron (Fe) content higher than 65%. Transitory Brazilian iron ore supply losses notwithstanding, China’s push to reduce pollution in its steelmaking sector will continue to support demand for Brazil’s high-grade ores – i.e., ores with iron (Fe) content higher than 65%. This will allow the continued development of an active spread market, not unlike spread markets in commodities like oil, which will expand hedging and trading opportunities for producers, consumers and investors (Chart 2). Older, more polluting steelmaking technology in China will continue to be replaced by plants that favor Brazil’s high-grade ores, then Australia’s benchmark-type grades (62% Fe), then, as a last resort, the lower quality domestic ores. In a steelmaking market still suffering significant overcapacity, we expect policymakers will, at some point, discover the benefit of letting markets forces do the work of forcing older technology offline, as happened with the country’s domestically produced lower-quality iron ore, which has lower iron content and higher impurities than Brazilian and Aussie imports.4 We believe growth in China’s steel and steel products demand – hence iron ore demand – likely has peaked and is in the process of flattening or declining slightly, which will alter the composition of iron ore imports and tilt them in favor of high-grade Fe imports from Brazil over the next 3 - 5 years (Chart 3). This leveling off in steel demand growth will put a premium on more efficient technology to meet future demand, particularly with the pollution constraints that will, we believe, be an enduring feature of this market.5 Chart 3China's Steel Demand Growth Likely Has Peaked China's Steel Demand Growth Likely Has Peaked China's Steel Demand Growth Likely Has Peaked Impurities found in lower-grade iron ore raise steelmaking costs by increasing unwanted mineral build-ups in blast furnaces, increase pollution and lower mills’ efficiency.  With inventories re-building following the winter steelmaking hiatus in China, imports will continue to grow market share at the expense of indigenous lower-quality ores (Chart 4). Imports from Australia, which mostly price to the 62% Fe benchmark, will continue to grow, but we strongly believe that in China’s post-anti-pollution-campaign market, Brazilian imports will see growth increasing (i.e., the 2nd derivative) at a higher rate (Chart 5). Chart 4Chinese Iron Ore Inventories Fall Relative To Steel Production Chinese Iron Ore Inventories Fall Relative To Steel Production Chinese Iron Ore Inventories Fall Relative To Steel Production Chart 5China's Brazil, Australia Import Growth Will Recover China's Brazil, Australia Import Growth Will Recover China's Brazil, Australia Import Growth Will Recover These imports are lower in cost, and higher in quality than the domestic iron ore. This is particularly important when it comes to keeping costs under control – impurities found in lower-grade iron ore raise steelmaking costs by increasing unwanted mineral build-ups in blast furnaces, increase pollution and lower mills’ efficiency. Extended Output Cuts Favor High-Grade Ores The biggest reason supporting our view high-grade iron ores will continue to grow market share at the expense of lower-quality domestic supply and benchmark 62% Fe material is the recent behavior of the central government and local governments vis-a-vis pollution. Both have shown they are not averse to extending operating restrictions on high-polluting industrial plants, even in provinces where steelmaking is a large employer. Last year, major steel producing regions– Hebei, Jiangsu, Shandong, Liaoning – increased production during the winter months, likely driven by higher margins at the steelmakers (Chart 6). This indicates compliance with anti-pollution regulations fell significantly (Chart 7). In turn, this led to higher pollution, according to the latest available data from China’s National Environmental Monitoring Centre, which shows concentrations of particulate matter 2.5 micrometers or less in diameter (i.e., PM2.5) rose again this year (Chart 8). Chart 6Higher Margins, Higher Output Higher Margins, Higher Output Higher Margins, Higher Output Chart 7 Consequently, Chinese authorities decided to tighten anti-pollution measures by extending production cuts beyond the heating season into 3Q and 4Q19.6 Furthermore, the top producing city, Tangshan, in the province of Hebei extended its most elevated level of smog alert on March 1 and deepened production cuts to 70% from 40%, with reported cases of complete operations being halted. Chart 8China's Pollution Is Increasing; Steelmaking Curbs Will Persist China's Pollution Is Increasing; Steelmaking Curbs Will Persist China's Pollution Is Increasing; Steelmaking Curbs Will Persist Last month, Chinese Communist Party (CCP) officials in Hebei announced plans to cut steel production by 14mm MT this year and next. Going forward, China’s environment ministry said winter restrictions will be extended for a third year during the 2019-2020 winter period. As we argued last year, winter curbs likely will become a permanent feature of China’s steelmaking landscape. Combined with China’s steel de-capacity reforms, iron ore and steel markets will continue to evolve to a less-polluting presence in the country.7 As a consequence, IO grade and form differentials are now crucial input in our analysis.8 We believe a wider than usual premium will remain until new high-grades and pellets supplies come on line in the next few years. Credit Stimulus Vs. Battle For Blue Skies The reversal in China’s credit cycle and in the Fed’s monetary policy stance will be supportive of steel and iron ore prices going forward. In fact, our credit cycle proxy suggests global industrial activity will increase in the next few months (Chart 9).9 Additionally, our geopolitical strategists’ base case suggests a resolution of the Sino-U.S. trade war likely will occur this year. This will support EM income growth, which will stimulate commodity demand generally at the margin. Chart 9Upturn in China's Credit Cycle Will Support Iron Ore Prices Upturn in China's Credit Cycle Will Support Iron Ore Prices Upturn in China's Credit Cycle Will Support Iron Ore Prices We believe China’s credit cycle bottomed in 1Q19 and that Chinese authorities will modestly increase stimulus in 2H19.10 As discussed previously, we do not expect this new round of stimulus to be as large as previous rounds; China’s economy is in better shape now than it was at the start of previous expansionary credit cycles, hence the magnitude of the stimulus needed to revive the economy is lower. Nonetheless, this stimulus will be sufficient to strengthen China’s and EM’s steel-intensive activities in the coming months. As long as China maintains its anti-pollution drive, high-grade iron ore will continue to grow market share. Historically, these sectors correlated positively with the 62% Fe content benchmark (Chart 10). However, the expected stimulus works against Beijing’s critically important battle for blue skies. A revival of China’s industrial activity would increase PM2.5 concentrations above targets. Chart 10China's Stimulus Will Stoke Iron Ore Demand China's Stimulus Will Stoke Iron Ore Demand China's Stimulus Will Stoke Iron Ore Demand These constraints, we believe, mean China’s policymakers will have to incentivize steelmakers to favor lower-polluting high-grade iron ore (Fe > 65%), in order to maximize steel output subject to their emissions target. This will widen the form and grade premiums ahead of next year’s winter period. Bottom Line: As long as China maintains its anti-pollution drive, high-grade iron ore will continue to grow market share, as steelmakers upgrade their technology and inefficient mills are shuttered. This will favor Brazilian exports going forward, and we expect the rate of growth in these imports to increase. In line with our view, we are opening a long 65% Fe spot vs. a short 62% Fe spot position at tonight’s close. This is a tactical position, but could easily become a strategic recommendation.   Robert P. Ryan, Senior Vice President Commodity & Energy Strategy rryan@bcaresearch.com Hugo Bélanger, Senior Analyst Commodity & Energy Strategy HugoB@bcaresearch.com   Footnotes 1      This index is published by Beijing Custeel E-Commerce Co., Ltd. 2      We flagged this risk in our February 21, 2019, report entitled “The New Political Economy of Oil.” We noted the odds of a U.S. – Russia military confrontation are low, and that “the U.S. would revive the Roosevelt Corollary to the Monroe Doctrine, and that Russia and China most likely would concede Venezuela is within the U.S.’s sphere of influence, as neither intends to project the force and maintain the supply lines … a confrontation would require.” That said, there is always the risk such a confrontation could go kinetic, or that either or both sides could lunch a cyberattack to disable its adversary. The Roosevelt Corollary refers to U.S. President Theodore Roosevelt’s extension of the Monroe Doctrine at the beginning of the 20th century, which has been used by the U.S. to justify the use of military power in the Western Hemisphere. Our February 21 report is available at ces.bcaresearch.com, as is a Special Report on Venezuela published November 22, 2018, entitled “Venezuela: What Cannot Go On Forever Will Stop,” which discusses Venezuela’s debts to China and Russia, et al. See also “Exclusive: Trump eyeing stepped-up Venezuela sanctions for foreign companies – Bolton” and “Oil hits 2019 high on OPEC cuts, concerns over demand ease,” published by reuters.com March 29 and April 2, 2019, respectively. 3      Please see “Three importers cut Iran oil shipments to zero - U.S. envoy” published April 2, 2019, by reuters.com. 4      According to Platts, “at least half of China’s previous 300 million mt plus iron ore mining capacity has left the market for good.” Please see “China’s quest for cleaner skies drives change in iron ore market,” published January 30, 2019, by S&P Global Platts. CRU estimates average iron content in China’s ores is 30%, which means they must undergo costly upgrading to be useful to steelmakers. 5      Australian miners are expected to bring on significant volumes of high-grade iron ore beginning in 2022 - 23, with Fe content as high as 70%, according to the Department of Industry, Innovation and Science’s March 2019 Resources and Energy Quarterly. 6      Please see “Tangshan mulls output curbs for 2nd, 3rd quarters of 2019” published January 22, 2019, by metal.com. 7      Please see China to extend winter anti-smog measures for another year published March 6, 2019, by reuters.com. 8      Grade premium: The chemistry of iron ore supply varies widely in terms of Fe content. Higher Fe content reduces production cost and pollution per unit of steel output. The higher the quality, the higher the volume of steel produced relative to energy consumed. The current global benchmark iron ore is 62% Fe, but China’s evolution to a less-polluting steelmaking sector will raise the importance of higher-grade markets. Form premium: A steelmaker’s blast furnace typically consumes iron ore in pellets, fines or lumps combined with coking coal. Fines are the most common form of iron ore, and account for ~ 75% of total seaborn IO market. This form cannot be directly fed in the blast furnace and requires an extra sintering step. Sintering is highly polluting and coal-intensive process that compresses fines into a more useable form. This process is usually conducted on-site at steel mills. On the other hand, lumps and pellets are direct feedstock and therefore completely avoid the highly polluting sintering step. Both types of premium are primarily affected by environmental policies in consuming countries, coke prices and steelmills’ profitability. 9      Modeling historical iron ore prices remains difficult because of the short sample available for spot iron prices – i.e., the benchmark 62% Fe. Before 2009, iron ore prices were determined using a producer pricing system. Once a year, prices were negotiated by miners and steelmakers and would be fixed for the remaining of the year. Given that iron ore supply was plentiful relative to demand, prices were fairly stable and this mechanism was used for over four decades. The rapid rise of emerging economies – mainly China – during the 2000s forced the pricing system to adjust toward a spot-market pricing system. The short spot-price time series available for analysis increases the distortion of policy-driven exogenous shocks like China’s de-capacity and winter restriction policies. This makes it difficult to identify the underlying relationships between its price and potential explanatory variables, and forces us to rely on theory and analogous experience in other markets like crude oil. 10     Please see BCA Commodity and Energy Strategy Weekly Report titled “Bottoming Of China’s Credit Cycle Bullish For Copper Over Near Term,” published March 14, 2019. It is available at ces.bcaresearch.com Investment Views and Themes Recommendations Strategic Recommendations Tactical Trades Trade Recommendation Performance In 2019 Q1 Image Commodity Prices and Plays Reference Table Trades Closed in 2019 Summary of Closed Trades Image

Steel Fundamentals Make A Compelling Case Steel Fundamentals Make A Compelling Case ​​​​​​Overweight Since our upgrade to overweight mid-last month,1 steel stocks have been outperforming as operating metrics have continued to fire on all cylinders. New orders have been soaring in the past two years as end demand has proven exceptionally resilient and the new orders/inventories ratio clearly demonstrates the industry’s struggles to keep pace with the market’s demand for their products (second panel). The resulting increase in activity has pushed industry capacity utilization to post-GFC highs (third panel). With solid demand in place and constrained capacity, a firm pricing environment seems assured and the focus turns to costs. On that front, the news is equally encouraging; iron ore prices have been modestly rising for much of the past four years but are at levels nearly half those of the previous period (bottom panel). Net, the earnings outlook for steel stocks stands on exceptionally positive footing; stay overweight. The ticker symbols for the stocks in the S&P 1500 steel index are: BLBG: S15STEL – NUE, STLD, RS, X, ATI, CMC, CRS, WOR, AKS, SXC, TMST, HAYN and ZEUS.   Footnotes 1      Please see BCA U.S. Equity Strategy Weekly Report, “Catharsis” dated January 14, 2019, available at uses.bcaresearch.com.

Overweight While steel stocks should have benefitted enormously from the U.S./China trade war and steel import tariffs, China macro dictates the fate of the S&P 1500 steel index. China’s waning fiscal and credit impulses have weighed heavily on U.S. steel stocks. Nevertheless, the recovering Li Keqiang index is sending a positive signal (second panel) and recent news of a mini fiscal package centered on high speed rail infrastructure spending is a step in the right direction (bottom panel). The U.S. dollar is another important macro variable driving U.S. steel stocks performance. The greenback’s steep appreciation since April 2018 has dealt a dual blow to domestic steel producers: not only is the underlying commodity quoted globally in U.S. dollars, but also FX translation losses have dented sector profitability. A pause in the Fed’s hiking cycle could catalyze a reversal of these headwinds. Bottom Line: In Monday’s Weekly Report, we lifted the S&P 1500 steel index from underweight to overweight and locked in gains of 2.3%. This move shifts the S&P materials sector into the overweight column; please see our Weekly Report for more details. The ticker symbols for the stocks in the S&P 1500 steel index are: BLBG: S15STEL – NUE, STLD, RS, X, ATI, CMC, CRS, WOR, AKS, SXC, TMST, HAYN and ZEUS. Made Of Steel Made Of Steel  

Highlights Portfolio Strategy The budding recovery in Chinese infrastructure outlays and easing in monetary conditions, a pause in the U.S. dollar’s rally on the back of a more dovish Fed and improving domestic steel final-demand dynamics along with compelling valuations and technicals, all suggest it no longer pays to be bearish the S&P 1500 steel index. Boost to overweight. A marginally improving China monetary backdrop, a de-escalation in the U.S./China trade tussle, recovering EM market internals and a brightening profit backdrop, all signal that a re-rating phase looms in the S&P materials sector. Upgrade to a modest overweight. Recent Changes Boost the niche S&P 1500 Steel Index to overweight today. This move also lifts the S&P Materials Index to a modest overweight. Table 1 Catharsis Catharsis Feature The S&P 500 convulsed following the December 19th Fed meeting and suffered a cathartic 450 point peak-to-trough fall last month. The Fed likely made a policy error, and Fed Chair Powell’s resolve is getting tested as has happened with every Chair since Volcker (Chart 1).1 Chart 1Powell's Resolve Getting Tested Powell's Resolve Getting Tested Powell's Resolve Getting Tested The top panel of Chart 2 shows that the 2018 peak in the SPX occurred one week prior to the September Fed meeting. That meeting, when the Fed raised rates for the third time that year, was the straw that broke the camel's back. Indeed, the bond market has been signaling that the U.S. economy has reached the neutral rate last year, as the 10-year UST yield stalled near the 3.10% mark on several occasions (middle panel, Chart 2). Chart 2Fed Policy Mistake Fed Policy Mistake Fed Policy Mistake Our recent research also suggests that the Fed’s tightening cycle (from trough-to-peak) is now above the historical median and at least a pause is warranted.2 To put last year’s discount rate increases into further perspective, bottom panel of Chart 2 shows that a 100bps increase in the fed funds rate caused a roughly 30% collapse in the forward P/E. Not only is this multiple compression overdone, but prices also corrected 19% from peak-to-trough, likely paving the way for a smart recovery. Our running assumption remains that the U.S. economy will avoid recession this year and EPS will continue to expand. True, the yield curve inversions have widened beyond the 5/3 and 5/2 slopes to the 7/1, and we heed the bond market’s message (Chart 3). However, as we highlighted last month, yield curve inversions occur before stock market peaks. Keep in mind that the most important yield curve slope, the 10/2, has not yet inverted. The upshot is that the SPX has yet to peter out for the cycle.3 Chart 3Yield Curve Inversion Is Spreading Yield Curve Inversion Is Spreading Yield Curve Inversion Is Spreading With regard to our end-2019 SPX target we are revising our base case scenario to 3,000 (from 3,150 previously),4 based on a 2020 EPS revision to $181 (from $191 previously),5 but we are sustaining the multiple at 16.5 times (Table 2). Assuming 2018 EPS end near $162, this represents a 6% EPS CAGR, in line with the still mid-single digit expansion signal from our EPS growth model (Chart 4). Table 2SPX EPS & Multiple Sensitivity Catharsis Catharsis Chart 4EPS Growth Model Still Expects Mid-Single Digit Expansion EPS Growth Model Still Expects Mid-Single Digit Expansion EPS Growth Model Still Expects Mid-Single Digit Expansion Adding it up, stocks hit rock bottom late-last year and a pause in the Fed tightening cycle, at least for the first half of the year, will likely serve as a welcome catalyst; any positive news on the trade tussle front with China will also act as a tonic for stocks, especially beaten down deep cyclicals. This week we are upgrading a U.S./China trade war GICS1 sector victim to a modest overweight position, via boosting a niche deep cyclical sub-index to an above benchmark allocation. Made Of Steel We are booking gains of 2.3% in the niche S&P 1500 steel index and boosting it from underweight all the way to an overweight stance. Beyond the contrary buy signal that bombed out technicals and depressed valuations are sending (Chart 5), there are high odds that relative profit outperformance is in the early innings. Chart 5Steel Is A Steal Steel Is A Steal Steel Is A Steal While U.S. steel stocks should have benefitted enormously from the U.S./China trade war and steel import tariffs, China macro dictates the fate of the S&P 1500 steel index. China’s waning fiscal and credit impulses have weighed heavily on U.S. steel stocks (top panel, Chart 6). Chinese authorities have been trying to engineer a soft landing, but the Chinese manufacturing PMI has now dipped below the boom/bust line (middle panel, Chart 6). Chart 6Mixed China Signals... bca.uses_wr_2019_01_14_c6 bca.uses_wr_2019_01_14_c6 Nevertheless, the recovering Li KEQIANG index is sending a positive signal (bottom panel, Chart 6). In addition, recent news of a mini fiscal package centered on high speed rail infrastructure spending is a step in the right direction. Historically, Chinese infrastructure outlays and relative share prices have been joined at the hip (middle panel, Chart 7). Chart 7...But Monetary And Fiscal Taps Are Opening ...But Monetary And Fiscal Taps Are Opening ...But Monetary And Fiscal Taps Are Opening On the monetary front, the easing in the banks’ reserve-requirement-ratio (RRR), albeit with a delayed effect, should also aid infrastructure spending uptake (RRR shown inverted, bottom panel, Chart 7). Similarly, the steepening in the Chinese yield curve underscores that easing financial conditions are conducive to a pickup in capital outlays (top panel, Chart 7). The U.S. dollar is another important macro variable driving U.S. steel stocks performance. The greenback’s steep appreciation since April 2018 has dealt a dual blow to domestic steel producers: not only is the underlying commodity quoted globally in U.S. dollars, but also FX translation losses have dented sector profitability. Despite the grim U.S. dollar news, there is light at the end of the tunnel. Were the Fed to pause its hiking cycle, at least in the front half of the year, the greenback’s advance may go on hiatus. Importantly, J.P. Morgan’s EM FX index is staging a comeback and steel prices are holding their own (top and bottom panels, Chart 8). Chart 8Bright Profit Drivers Bright Profit Drivers Bright Profit Drivers On the domestic front, news is also encouraging. Ever since President Trump came into power, blast furnaces have been running around the clock. Industry resource utilization rates are in a V-shaped recovery since 2016 and only recently returned to levels last seen prior to the Great Recession (middle panel, Chart 8). Steel new order growth is running at a healthy clip and is even surpassing inventory accumulation. This bright demand backdrop is a boon for steelmaking earnings (Chart 9). Chart 9Domestic Operating Backdrop... Domestic Operating Backdrop... Domestic Operating Backdrop... With regard to the domestic demand front, while automobile sales have been flirting with the zero growth line for the better part of the past three years, non-residential construction has been a primary beneficiary from the easing in fiscal policy (bottom panel, Chart 10). Fiscal thrust will continue to goose the U.S. economy in 2019, according to the IMF’s October 2018 World Economic Outlook update, and a new infrastructure spending bill, however modest, will, at the margin, buoy steel profits. Finally, according to the Fed’s latest Senior Loan Officer Survey, bankers are far from constricting the flow of credit toward the key end-demand segments, autos and commercial real estate. Chart 10...And Domestic Demand Will Buoy Steel Profits ...And Domestic Demand Will Buoy Steel Profits ...And Domestic Demand Will Buoy Steel Profits In sum, compelling valuations and technicals, the budding recovery in Chinese infrastructure outlays and easing in monetary conditions, a pause in the U.S. dollar’s rally on the back of a more dovish Fed and improving domestic steel final-demand dynamics, all suggest that it no longer pays to be bearish the S&P 1500 steel index. Bottom Line: Lift the S&P 1500 steel index from underweight to overweight and lock in gains of 2.3%. The ticker symbols for the stocks in the S&P 1500 steel index are: BLBG: S15STEL – NUE, STLD, RS, X, ATI, CMC, CRS, WOR, AKS, SXC, TMST, HAYN and ZEUS. Time To Dip Into Materials Raising the S&P 1500 steel index to an above benchmark allocation shifts the S&P materials sector into the overweight column. China macro dominates the direction of U.S. materials stocks. On the monetary front, the easing cycle continues unabated and the near 150bps year-over-year drop in the 10-year Chinese Treasury yield will soon start to bear fruit (yield change shown inverted and advanced, bottom panel, Chart 11). Chart 11Buy Materials As China's Monetary Spigots Are Loosening Buy Materials As China's Monetary Spigots Are Loosening Buy Materials As China's Monetary Spigots Are Loosening The renminbi also moves in lockstep with relative share prices. The apparent de-escalation in the U.S./China trade tensions has boosted the CNYUSD and is signaling that a playable reflation trade is in the offing in the S&P materials sector (top panel, Chart 11). Beyond the budding recovery in some key Chinese data (bottom panel, Chart 12), the troughing in emerging markets (EM) currencies versus the greenback also suggests that U.S. materials stocks have put in a bottom (top panel, Chart 12). Chart 12Shifting EM Internals Are A Boon For Materials Shifting EM Internals Are A Boon For Materials Shifting EM Internals Are A Boon For Materials The EM stock outperformance compared with the global benchmark (second panel, Chart 12) along with EM market internals corroborate the EM FX message. In more detail, EM Latin American equities have been significantly outperforming EM Asian bourses. This real time proxy of commodity producers versus consumers has been an excellent indicator of relative share prices and the current message is to expect more relative gains in the S&P materials sector (third panel, Chart 12). On the earnings front, while last year’s trade dispute related collapse in relative share prices is signaling profit trouble in the coming months, our EPS growth model (comprising the U.S. dollar, interest rates and commodity prices) has ticked up. Similar to the 2012 and 2016 lows, there are good odds that our model is picking up a soft landing in profits (second panel, Chart 13). Chart 13Profit Growth Model Has Troughed Profit Growth Model Has Troughed Profit Growth Model Has Troughed S&P materials sub-sector EPS breadth has slingshot higher compared with the overall market and relative long-term EPS growth forecasts are trying to bottom near the 2016 nadir (third & bottom panels, Chart 13). With regard to the sector’s financial health, materials’ indebtedness profile remains in recovery mode, still in the aftermath of the late-2015/early-2016 manufacturing recession with net debt-to-EBITDA in a free fall and a steeply accelerating interest coverage ratio. Capital outlays are also expanding smartly and are now on an even keel with sales growth (Chart 14). Given this improvement in corporate health, there are low odds of debt-related materials sector deflation. Chart 14Clean Bill Of Corporate Health Clean Bill Of Corporate Health Clean Bill Of Corporate Health Taking the pulse of investor sentiment toward this niche deep cyclical sector reveals that technical conditions are as oversold as can be; in fact our Technical Indicator sits at one standard deviation below the historical mean, a level that has preceded previous recovery rallies (Chart 15). Chart 15Contrary Buy Alert: Under-owned... Contrary Buy Alert: Under-owned... Contrary Buy Alert: Under-owned... Finally, according to our Valuation Indicator, relative valuations have crumbled to the lowest level since the GFC, and even relative EV/EBITDA has also corrected to the historical mean (Chart 16). Chart 16...And Unloved ...And Unloved ...And Unloved Netting it out, a marginally improving China monetary backdrop along with a de-escalation in the U.S./China trade tussle, recovering EM market internals and a brightening profit backdrop, all signal that a re-rating phase looms in the S&P materials sector. Bottom Line: Lift the S&P materials sector to a modest overweight position.   Anastasios Avgeriou, Vice President U.S. Equity Strategy anastasios@bcaresearch.com Footnotes 1      Please see BCA U.S. Equity Strategy Weekly Report, “Will The Market Test Powell?” dated November 13, 2017, available at uses.bcaresearch.com. 2      Please see BCA U.S. Equity Strategy Weekly Report, “Manic Market” dated November 19, 2018, available at uses.bcaresearch.com. 3      Please see BCA U.S. Equity Strategy Weekly Report, “Signal Vs. Noise” dated December 17, 2018, available at uses.bcaresearch.com. 4      Please see BCA U.S. Equity Strategy Weekly Report, “Lifting SPX Target” dated April 30, 2018, available at uses.bcaresearch.com. 5      Ibid. Current Recommendations Current Trades Size And Style Views Favor value over growth Favor large over small caps